Adding an existing SSL certificate

Introduction

In FASTPANEL^® you can work with SSL certificates:

• Install an existing one
• Install a Let's Encrypt certificate
• Create a Self-signed Certificate
• Create a Certificate Signing Request

important

To apply an existing SSL certificate it has to be bought and issued.

To install an existing certificate, perform the following actions:

1. Go to the site card you need to apply a certificate to and click the "SSL Certificates" menu

   

2. In the window that opens, click "New certificate"

   

3. In the modal window use the following settings:

   Setting	Value
   Type	Existing
   Site	A site you need to apply your certificate to
   Request	Not selected
   Private Key	A private key that was used to generate a certificate request (CSR)
   Certificate	Has to be copied and pasted from a file received from certificate authority
   Chain	Has to be copied and pasted from a file received from certificate authority

   

   To save your certificate click "Save". The certificate will be applied to the selected site automatically.

note

http → https redirect is disabled by default. To enable it go to the "Settings" menu of the site card